7200 Monitor Instruction Manual
18 Information
18.1 Statistics
View Statistics
The measurement statistics are updated continually when the instrument is operating and provide a useful indication
of how the application is varying. The statistics are reset when the instrument is powered up and are therefore only
valid from that point. The statistic values can be viewed using the View Statistics menu.
Set Average Period
The average period determines the length of time measurement data is collected for use in calculating the statistics
average value. The average period can be set in the range 10 to 100 seconds, and is adjusted using the keys.
Pressing the OK key stores the new setting.
Download Statistics
This facility allows the downloading of the statistic values using the RS232 serial interface.
Reset Statistics
The statistic values can be reset using this menu.
18.2 Software Version
This display indicates the software version and serial number of the instrument and is useful for recording and problem
diagnosis.
18.3 Contact Information
This display provides contact information for Partech (Electronics) Ltd.
167300IM-Issue 12 Issue Date 14/10/2014 Page 37 of 50
To Next Page
Loading...