www.123send.net
123 - axept S900 User Guide v1.7
1.5 Connecting to the Network
Before starting the activation process, please ensure that you have the installation/activation details sent by
Optomany. If you do not have this information, please contact Optomany’s Support Team.
Power on the axept® S800 by pressing and holding the key on the keypad for a few seconds until the terminal
screen lights up (the start-up process may take a few minutes).
Please see section 12.2.1.1 to manually configure Ethernet settings if you do not wish to use DHCP.
Once the loading process is complete, the Network Configuration menu
will appear.
Highlight ‘ETHERNET’ using the and keys on the keypad
and press the key on the keypad to continue.
axept® S800 supports Dynamic Host Configuration Protocol (DHCP)
which automatically obtains all network settings.
To use this service, press the key on the keypad to continue.
axept® S800 validates the network connection and communicates with
the DHCP server to obtain an IP address and other network settings.
A confirmation screen will briefly be displayed once all network settings
have been successfully configured.
An icon will be displayed on the status bar afterwards to show axept®
S800 is connected via Ethernet.
To Next Page
Loading...
Need help?
General
