Need help?Do you have a question about the PCB Piezotronics Larson Davis NMS044 and is the answer not in the manual?
General| Model | NMS044 |
|---|---|
| Manufacturer | PCB Piezotronics Larson Davis |
| Category | Measuring Instruments |
| Type | Noise Monitoring System |
| Frequency Range | 10 Hz to 20 kHz |
| Microphone | Yes |
| Data Logging | Yes |
| Ingress Protection | IP65 |
| Standards | IEC 61672-1 |
| Output | USB |
| Connectivity | Ethernet, USB |
| Operating Temperature | 50°C |
| Storage Temperature | -40 to +60 °C (-40 to +140 °F) |
| Operating Humidity | 0% to 90% RH |
| Humidity Range | 0 to 100% RH |
| Dimensions | 150 mm |
Details NMS044 system kit components.
Lists available hardware and firmware options.
Guide to estimating and managing system power usage.
Step-by-step guide for physically assembling the NMS044 system.
Procedure for purchasing and setting up SIM card for gateway cellular service.
Steps to connect the gateway to cellular network and verify connection.
Recommended 831C SLM properties for NMS044 system integration.
How to use SoundLink IP hosting service for secure remote communication.
Instructions for packing system components into deployment travel packs.
Steps for connecting microphone and preamplifier to EPS2116.
Mounting EPS2116 and microphone assembly onto telescoping pole.
Procedure for connecting the solar panel to the system.
How to power on the complete NMS044 system.
Guide to calibrating the 831C Sound Level Meter for accuracy.
Final check of system status indicators before deployment.
Setting up measurement parameters, history, and triggers.
How to download and view recorded measurement data.
Meaning of LED indicators on 831C, gateway, and charge controller.
Guidelines for safely shipping and storing the NMS044 system.
Physical connections for 831C SLM with preamplifier options.
Enabling and configuring modem low power for extended battery life.
Configuring RV50X gateway for optimal use with Larson Davis instruments.
Weight and dimensions of NMS044 system and components.
Product compliance with EU directives and relevant standards.
To Next Page