PCTEL, Inc. Page 9 of 42 Rev T
MULTI-TECHNOLOGY
• Aggregate Power measurement
(RSSI, EPS, or Spectrum Analysis)
• Delay and Signal Strength of
neighboring cells
• RSSI Channel Scans
• Spectrum Analyzer measurements
• High Performance GPS Receiver
Blind Scan
The Blind Scan feature for 5G NR, FD-LTE,
TD-LTE, NB-IoT, WCDMA, GSM, CDMA,
EV-DO, and Wi-Fi technologies scans the
selected band and provides the active
channel numbers. Blind Scan is useful for
conducting a full band network search
where prior knowledge about active
channels is incomplete or unknown. It is
also beneficial for network benchmarking to
obtain a first-glance view of the RF
infrastructure density and configuration.
For LTE, Layer 3 option is supported.
Bluetooth Communication
The Bluetooth Communications enables the
user to communicate wirelessly to an
Android™ device. Bluetooth requires an
antenna to operate and comes with the
scanner.
For more information please visit
www.pctel.com.
1.3. Notices
WARNING: These devices have no
protection against lightning. Please turn off
the scanning receiver during a thunderstorm
and, if applicable, take the antenna inside
the car before a thunderstorm approaches.
The scanning receiver itself is not intended
for “in weather” outdoor use.
NOTICE: There are no user serviceable
parts inside the SeeGull IBflex Scanning
Receiver.
1.4. Compliance
RoHS Compliance
The PCTEL SeeGull IBflex scanning
receiver being delivered to participating
European nations is compliant to EU
Directive 2011/65/EU (RoHS).
The PCTEL SeeGull IBflex scanning
receiver is compliant to "Administrative
Measure on the Control of Pollution Caused
by Electronic Information Products" ("China
RoHS").
ISO Compliance
PCTEL’s Quality Management System has
been certified to be compliant with ISO
9001:2015.
To Next Page
Loading...
