Peak 209C - Product Features and Specifications; Clear-Floor Direct-Drive Model Features

1
I. PRODUCT FEATURES AND SPECIFICATIONS
CLEAR-FLOOR DIRECT-DRIVED MODEL FEATURES
Model 209C 209CH (See Fig. 1)
· Direct-drived design, minimize the lift wear parts and breakdown ratio
· Dual hydraulic cylinders, designed and made as ANSI standards, utilizing oil seal in
cylinder
· Self- lubricating UHMW Polyethylene sliders and bronze bush
· Single-point safety release, and dual safety design
. Clear-floor design, provide unobstructed floor use
. Overhead safety shut-off device prevents vehicle damage
· 4pcs of 3-stages arms with drop in rubber pads
. Standard adjustable heights accommodates varying ceiling heights
MODEL 209C 209CH SPECIFICATIONS
Fig. 1