Pedego ELEVATE - Component Preparation and Mounting

14
Assembly Instructions
ASSEMBLY INSTRUCTIONS
Open kit box and remove the
pedals, disc brake rotor and
lockring (this will be found
in the manual bag inside the
kit box).
Remove packaging from the
saddle and dropper seatpost,
attach dropper seatpost
to the bicycle frame (make
sure to remove the zip tie on
the dropper seatpost cable)
and clamp the bicycle in a
workstand. If you do not
have a workstand nd a level
space to place the bike on
the oor, having a second
person will be helpful with
assembly.
Remove all packaging
material from the bicycle.
3
4
5