42
TROUBLESHOOTING
Error Messages on the Cycle Computer
Troubleshooting
Warning Codes:
List of Warning Codes:
Continued on next page...
If a warning message is displayed on the screen to the right of
the battery level indicator, follow one of the procedures below to
remedy the situation.
• The warning message will disappear once the error is xed.
Code Display
preconditions
Operational
restrictions while
warning is displayed
Remedy
W010 Temperature of the
drive unit is higher
than it is during
times of normal
operation.
Power assistance
may be lower than
usual.
Stop using the assist
function until the
temperature of the
drive unit drops. If the
situation does not
improve, contact the
place of purchase.
W011 The travelling speed
cannot be detected.
The maximum
speed up to which
power assistance
is provided may be
lower than usual.
Check that the speed
sensor is properly
installed. If the situation
does not improve,
contact the place of
purchase.
To Next Page
Loading...
