13
Assembly Instructions
ASSEMBLY INSTRUCTIONS
Required Assembly Tools
• Diagonal cutting pliers
• ¼” Torque wrench w/ 4, 5 and 6mm Allen key
• ⅜” Torque wrench w/ Shimano TL-FC33 or Park Tool BBT-69.2,
Park Tool TWB-15
• Pedal wrench w/ 6 mm Allen key or 15mm open end
• Rotor truing fork - Park Tool DT-2
• Suspension pump
• Tire pump
Assembly Steps
Cut packaging straps and or
tape, carefully remove carton
staples, and open the top of
the box.
Remove the contents from
the box including the parts
kit, saddle with dropper
seatpost, front wheel, and
then remove the bicycle.
1
2
Continued on next page...
To Next Page
Loading...
