43
TROUBLESHOOTING
Error Messages on the Cycle Computer continued
Error Codes:
Continued on next page...
If an error message is displayed on the entire screen, follow one of
the procedures below to reset the display.
• Press the power button on the battery.
• Remove the battery from the holder.
Code Display
preconditions
Operational
restrictions while
warning is displayed
Remedy
W013 Initialization of
torque sensor was
not completed
successfully.
Power assistance
may be lower than
usual.
With your foot off the
pedal, press the battery
power button and turn
on the power again. If
the situation does not
improve, contact the
place of purchase.
W032 An electronic
derailleur may
have been
installed in place
of a mechanical
derailleur.
Power assistance
provided in [WALK]
mode may be lower
than usual.
Reinstall the derailleur
for which the system is
congured to support.
If the situation does not
improve, contact the
place of purchase.
Troubleshooting
To Next Page
Loading...
