Pedego ELEVATE - Page 44

44
TROUBLESHOOTING
Error Messages on the Cycle Computer continued
List of Error Codes:
Code Display
Preconditions
Operational
Restrictions
While Warning is
Displayed
Remedy
E010 A system error was
detected.
Power assistance is
not provided during
riding.
Press the power
button of the battery
to turn it on again. If
the situation does not
improve, contact the
place of purchase.
E011 An error occurred in
system operation.
Power assistance is
not provided during
riding.
Turn on the power
again.
E013 An anomaly was
detected in the drive
unit’s rmware.
Power assistance is
not provided during
riding.
Contact the place of
purchase or bicycle
dealer.
E014 The speed sensor
may have been
installed in the
wrong position.
Power assistance is
not provided during
riding.
Contact the place of
purchase or bicycle
dealer.
E020 A communication
error between the
battery and drive unit
was detected.
Power assistance is
not provided during
riding.
Check that the cable
between the drive
unit and battery is
properly connected. If
the situation does not
improve, contact the
place of purchase.
E021 Battery connected to
drive unit conforms
with system
standards but is not
supported.
Power assistance is
not provided during
riding.
Press the power
button of the battery
to turn it on again. If
the situation does not
improve, contact the
place of purchase.
Continued on next page...
Troubleshooting