Pedego ELEVATE - Page 45

45
TROUBLESHOOTING
Error Messages on the Cycle Computer continued
E022 Battery connected
to drive unit does not
conform with system
standards.
All system functions
shutdown.
Press the power
button of the battery
to turn it on again. If
the situation does not
improve, contact the
place of purchase.
E033 The current
rmware doesn’t
support system
operation.
Power assistance is
not provided during
riding.
Connect to E-TUBE
PROJECT and update
rmware for all unit.
E043 Part of the cycle
computer’s rmware
may be damaged.
Power assistance is
not provided during
riding.
Contact the place of
purchase or bicycle
dealer.
For further troubleshooting information, refer to the Shimano
STEPS user’s manual included in your parts kit or online at:
http://si.shimano.com.
Troubleshooting