74
EN
Figure 4.7 Drill holes’ dimensions of PSI-J2000-TL / PSI-J2500-TL / PSI-J3000-TL
Figure 4.8 Drill holes’ dimensions of PSI-J3000-TLM / PSI-J4000-TLM / PSI-J5000-TLM / PSI-J6000-TLM
4.4.3 Mount the screws and the rear panel
The panels should be mounted in the mounting position by screws as shown in
Figure 4.9, Figure 4.10, Figure 4.11.
Figure 4.9 Mount the rear panel of PSI-J1000-TL / PSI-J1500-TL
247
77,59 2
ø8
240
120
ø8