TYING MACHINE FIXION 2
29_133084-G
5. USE
5.1. TYING MACHINE ON/OFF
The tying machine is started and stopped with the start/stop button (20).
5.2. ADJUSTING THE TIGHTNESS OF THE TIE
You can adjust the tightness of the tie to suit the type of wood you have to tie in place, by using the MODE button (23).
Table of equivalences
“MODE” button 1 2 3 4
Number of twists 2 to 2.5 4 to 4.5 6 to 6.5 7.5 to 8
5.3. RELOAD WITH THE LARGE TIE BAND SPOOL
1. Block the rear flange and turn the front flange clock-
wise to unlock it.
2. Remove the front flange from the lateral dispenser
(7).
16
To Next Page
Loading...
