pellenc FIXION 2 - 4.3. FITTING THE ADAPTABLE DISPENSER LOADED WITH THE SMALL TIE BAND SPOOL ONTO THE TYING MACHINE.

TYING MACHINE FIXION 2
29_133084-G
4.3. FITTING THE ADAPTABLE DISPENSER LOADED WITH THE SMALL TIE BAND SPOOL ONTO
THE TYING MACHINE.
1. Remove the guard (14) on the back of the tying ma-
chine.
2. Place the guard (14) into the slot reserved inside the
carrycase.
3. Fit the small tie band spool in place with the adapt-
able dispenser (6) instead of the guard (14).
Note
The mounting is identical for the 200 metre tie band spool.
15