Pentair Fleck 7000 NXT - Page 13

19. Maximum Flow Rate
This program step sets maximum flow rate of the generic flow
meter.
1. Press the Shift button to select the digit you want to modify.
2. Press the Up or Down buttons to adjust this value.
3. Press the Extra Cycle button.
20. Pulses per Gallon/Liter
This program step sets the pulses per gallon/liter for generic
flow meters.
1. Press the Shift button to select the digit you want to modify.
2. Press the Up or Down buttons to adjust this value.
3. Press the Extra Cycle button.
22. End of Master Programming Mode
MASTER PROGRAMMING GUIDE
continued
FLECK 7000 NXT Service Manual • 13