EasyManua.ls Logo

Pentax EG29-i10c - Reprocessing, Storage, and Maintenance

Pentax EG29-i10c
96 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Compatible products
This section describes the equipment that can be used in combination with this endoscope. For more
details, refer to “System chart” (p. 90).
For the equipment used in combination during cleaning / high - level disinfection /sterilization, refer to the
separate IFU (Reprocessing) of this endoscope.
The combinations of equipment and accessories that can be used with this product are listed below.
Prior to use, the product must be prepared and inspected according to its IFU.
Warning
PENTAX Medical does not warrant compatibility with unlisted products. If products are not
listed, contact the manufacturer of the equipment or accessory to confirm the compatibility and
instructions for use with PENTAX Medical products.
Note
When this endoscope is used in combination with other equipment, depending on how it is
connected, it may result in malfunction and/or unforeseen events to patients and /or medical
professionals. Pre - use operation checks and risk management associated with such changes
are recommended, particularly when the equipment used in combination is changed, added,
or upgraded.
Some products are not available depending on the sales region. For details, contact your local
PENTAX Medical service facility.
Video processor
Video processor models that can be connected with these endoscopes are shown below. For instructions
on video processor operation, refer to the IFU of the video processor.
Model Name Brand Name
EPK- i5500c PENTAX Medical

Related product manuals