Pentax EG29-i10c - Equipment Preparation

18
Nomenclature and functions
2
2-2. Scope connector
15
17
16
18
Umbilical Cord
Scope Connector
Water Jet Connector Cap
(OF - B118)
Model Name
Country of Origin
Serial Number
Date of Manufacture
 Alternative view
10
14
Electrical ContactsManufacturer Label
Figure 2.3
14. Suction Nipple
Connect the suction tube on the suction source to the suction nipple.
15. Air/ Water Port
Connect the air/ water feeding hose on the water bottle assembly to the air/ water port.
16. Water Jet Port
Attach a water jet check valve adapter (OE - C12).
1 7. Water Jet Check Valve Adapter (OE- C12)
Use it by attaching to the water jet port.
Connect the irrigation tube (OF - B113) to send sterile water from a syringe or irrigation pump to the
water jet nozzle at the distal end of the endoscope.
When an irrigation tube is not connected, close it with the water jet connector cap (OF- B118).
18. Venting Connector
Attach the ventilation cap (OE- C28) or leakage tester via the venting connector adapter (OE - C29)
here.