19
Preparation and inspection
3
Before use, the endoscope, accessories, video processor, and other components must be prepared and
carefully inspected according to the IFU. Any equipment used in combination with the endoscope must also
be prepared and inspected according to the respective instruction manuals.
Always perform pre - use inspection before each use.
Refer to “5 -1. Troubleshooting guide” (p. 76) for assistance in diagnosing an endoscope malfunction. If the
problem persists after troubleshooting or there is an apparent failure, do not use the endoscope. Send it for
repair according to “5 - 3. Returning the endoscope for repair” (p. 80).
Warning
• Always perform pre - use inspection before each use. NEVER use an endoscope with a suspected
abnormality. Doing so may result in malfunction, endoscope damage, and /or injury to the patient
and /or user.
• Ensure that another endoscope is also prepared to avoid interruption of the procedure due to
endoscope failure or unforeseen events.
3
Preparation and inspection
To Next Page
Loading...
Need help?
General
