Electromagnetic disturbances
This product conforms to IEC60601-1-2: 2014: Medical electrical equipment, IEC standard.
Guidance and manufacturer’s declaration- electromagnetic emissions
This product is intended for use in the electromagnetic environment specified below. The customer or the
user of this product should assure that it is used in such an environment.
Emissions test Compliance Electromagnetic environment- guidance
RF emissions
CISPR 11
Group 1
This product uses RF energy only for its internal function. Therefore,
its RF emissions are very low and are not likely to cause any
interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
This product is suitable for use in all establishments, including
domestic establishments and those directly connected to the public
low- voltage power supply network that supplies buildings used for
domestic purposes.
Harmonic emissions
IEC 61000 - 3 - 2
Complies Class A
at power input 220 V, 230 V and
240 V with operating frequency
50 Hz or 60 Hz
Otherwise, not applicable
Voltage
fluctuations/ flicker
emissions
IEC 61000 - 3 - 3
Complies
at power input 50 Hz, 220 to 240 V
Otherwise, not applicable
Case 7 Description of Endoscopes Class B
85
To Next Page
Loading...
Need help?
General
