Pentax EG29-i10c - Inspection and Connection of Ancillary Equipment to the Endoscope

42
Preparation and inspection
3
3-4. Inspection and connection of ancillary equipment to the endoscope
Inspect the ancillary equipment prepared in “3 -1. Preparation of the equipment”, such as the video
processor, monitor, and suction source, according to their respective IFU.
Video processor
Monitor
Suction source
Endoscopic device
Water bottle assembly
Irrigation pump
CO
²
Insufflator, etc.
Inspection of the video processor
Only use compatible PENTAX Medical video processors.
For compatible video processors, refer to “Compatible products” (p. 8) or “System chart” (p. 90).
For details on the preparation and inspection of the video processor, refer to the IFU of the respective
video processor.