Recommended separation distances between portable and mobile RF
communications equipment and this product
This product is intended for use in the electromagnetic environment in which radiated RF disturbances
are controlled. The customer or the user of this product can help prevent electromagnetic interference
by maintaining a minimum distance between portable and mobile RF communications equipment
(transmitters) and this product as recommended below, according to the maximum output power of the
communications equipment.
Warning
Portable RF communications equipment should be used no closer than 30 cm to any part of this
product or the peripheral equipment connected to this product, including cables specified by this
IFU. Otherwise, degradation of the performance of this product could result.
Note
• At 80 MHz and 800 MHz, the higher frequency range applies.
• These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Case 7 Description of Endoscopes Class B
88
To Next Page
Loading...
Need help?
General
