126
Shooting Functions
4
6
Use the four-way controller (23) to select [Start Interval],
and press the four-way controller (5).
7
Use the four-way controller (23) to select [Now] or [Set
Time], and press the 4 button.
If you selected [Now], proceed to Step 10.
8
Use the four-way controller (23) to select [Start Time],
and press the four-way controller (5).
9
Use the four-way controller (45) to select hours or
minutes, and use the four-way controller (23) to set the
time.
Press the 4 button to complete the setting.
10
Use the four-way controller (23) to select [Start
shooting], and press the 4 button.
The camera is ready to take a series of interval pictures.
11
Press the shutter release button halfway.
The autofocus system operates.
12
Press the shutter release button fully.
When [Start Interval] is set to [Now], the first picture is taken. When set
to [Set Time], shooting starts at the set time.
For shooting multiple pictures, pictures are taken at the interval set in
Step 3.
To cancel shooting, press the 3 button.
After the set number of pictures are taken, [Interval Shooting complete]
is displayed, and the camera returns to normal standby mode.
To Next Page
