Pentax K-50 - Inserting the Battery; Using the Lithium-Ion Battery

45
Getting Started
2
Inserting the Battery
The following power supplies can be used with the camera.
• Rechargeable Lithium-ion Battery D-LI109 (provided)
• AA Battery Holder D-BH109 with four AA batteries (optional)
• AC Adapter Kit K-AC128 (optional)
Use the battery charger D-BC109 and the rechargeable lithium-ion battery
D-LI109 to power the camera.
When using the battery for the first time or when the battery capacity
becomes low, recharge the battery.
Note: AC plug cord “Listed, Type SPT-2 or NISPT-2, 18/2 flexible
cord, rated 125 V, 7A, minimum 6ft (1.8m)”
1 Connect the AC plug cord to the battery charger.
2 Plug the AC plug cord into the power outlet.
Using the Lithium-ion Battery
Charging the Battery
Indicator lamp
AC plug cord
Battery charger