Pentax K-50 - Setting the File Name

225
Changing Additional Settings
7
2 Press the four-way controller (2)
to select [Create folder], and
press the 4 button.
A folder with a new number is created.
You can change the file names of images.
The default naming conventions are as follows depending on the [Color
Space] (p.144) setting in [Image Capture Settings] of the [A Rec. Mode
1] menu.
“xxxx” indicates the file number, and is displayed as a four-digit sequential
number.
For sRGB, you can change [IMGP] (4 characters) to the desired
characters.
For AdobeRGB, of the 4 characters you selected, the first 3 are assigned
in place of [IMG].
Example: When set to [ABCDxxxx.JPG], files are named
[_ABCxxxx.JPG] for AdobeRGB.
1 Select [File Name] in the [R Set-up 2] menu and press the
four-way controller (5).
The [File Name] screen appears.
2 Press the four-way controller (5).
The text-entry screen appears.
Only one folder can be created using this operation. Multiple empty folders
cannot be created consecutively.
Setting the File Name
Color Space File Name
sRGB IMGPxxxx.JPG
AdobeRGB _IMGxxxx.JPG
Create New FolderCreate New Folder
Creates a new storage folderCreates a new storage folder
with the following name:with the following name:
101PENTX101PENTX
CancelCancel
Create folderCreate folder
OKOK
OK