193
Playback Functions and Image Editing
6
1
Select an image for applying the digital filter in the single
image display, and press the four-way controller (3).
The playback mode palette appears.
2
Use the four-way controller (2345) to select D (Digital
Filter), and press the 4 button.
The screen to select a filter appears.
3
Use the four-way controller
(2345) to select a filter.
You can check the selected filter effect
with the background image.
You can select a different image by
turning the front e-dial (R).
Proceed to Step 7 if you do not need to
change the parameters.
4
Press the M button.
The screen to adjust the parameters appears.
5
Use the four-way controller (23)
to select a parameter and the
four-way controller (45) to
adjust the value.
6
Press the 4 button.
The screen that was displayed in Step 3 appears again.
7
Press the 4 button.
The save confirmation screen appears.
OKOK
OK
StopStop
MENU
INFO
Parameter Adj.Parameter Adj.
MonochromeMonochrome
MENU
100-0001100-0001
Cancel
MENU
Red
OK
OK
100-0001
To Next Page
Loading...
