Pentax K-50 - Using an External Flash (Optional)

243
Using the Flash
9
1 Set the mode dial to e, K or c.
2 Press the E button.
The built-in flash pops up.
3 Set the flash mode to G or H.
The shutter speed is set slower to give a proper exposure for the
background.
4 Take a picture.
1 Set the mode dial to b, L or a.
2 Set the flash mode to E or F.
3 Set the shutter speed (for b mode) or shutter speed and
aperture value (for L or a mode).
Set so a proper exposure is obtained at a shutter speed of 1/180 seconds
or slower.
4 Press the E button.
The built-in flash pops up.
5 Take a picture.
Using e/K/c Mode
Using b/L/a Mode