Pentax Optio E10 - Page 58

EN-58
In [Print All] Mode:
Lets you print all images with PictBridge.
1. If you wish to print all the images stored in the camera, you may
choose [Print All] in [Select Printing Mode].
2. To set Print Settings, follow steps 2 to 6 in [Print] Mode.(EN-56)
In [DPOF AUTOPRINT] Mode:
This function only lets you print the specified image based on the previous DPOF settings.
1. If you wish to print images with DPOF setting, you may choose [DPOF
AUTOPRINT] in [Select Printing Mode].
2. To set Print Settings, follow steps 2 to 6 in [Print] Mode.(EN-56)
 When connecting a printer which is not compatible with DPOF, [DPOF AUTOPRINT] cannot be selected.