EN-57
4. After Print Setting is set, the print icon is marked on the displayed
image. You can still use the four-way controller (WX) to change the
image by your preference, then press the button to print.
5. Use the four-way controller (ST) to access the paper selection
setting, then press the button to confirm.
[Paper Size]: You may select the desired item depending on the type of
printer being used.
[Border status]: You may select the desired item depending on the type
of printer being used.
6. This starts printing and displays the message “Printing now” on the
LCD monitor screen.The message will disappear after the printing is
finished. Then the screen returns to [Select Printing Mode].
To cancel printing:
Pressing the button during print data transfer displays the screen
for selecting whether to [Continue] or [Cancel] printing.
To Next Page
Loading...
