Pentax Optio S5n - Changing the USB Connection Mode; Changing the Video Output Format

146
7
Settings
You can change the USB connection mode depending on whether the
USB cable is to be connected to a printer (PictBridge) or a computer.
1 Select [USB Connection] on the [B Set-up] menu.
2 Press the four-way controller (5).
The pull-down menu appears.
3 Use the four-way controller (23) to select [PC] or
[PictBridge].
4 Press the Q Playback button.
The camera is ready to take pictures.
You can select the output format (NTSC or PAL) for taking or playing
back images on a TV.
1 Select [Video Out] on the [B Set-up] menu.
2 Press the four-way controller (5).
The pull-down menu appears.
3 Use the four-way controller (23) to select [NTSC] or
[PAL].
Choose the video output format to match the output format of the TV.
4 Press the Q Playback button.
The camera is ready to play back images.
Changing the USB Connection Mode
Changing the Video Output Format
How to recall the [B Set-up] menu
Four-way
controller
MENU button
OK button
Rec. Mode
MENU
Exit
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
AWB
AUTO
5M
MENU
e_kb386.book Page 146 Monday, February 28, 2005 2:39 PM