Pentax Optio S5n - Saving the Settings; Saving the Menu Items (Memory)

95
4
Taking Pictures
Saving the Settings
You can choose whether you want the set values to be saved when the
camera is turned off. If you select
O (On), the settings will be saved in
the status they were in immediately before the camera was turned off. If
you select
P (Off), the settings will be reset to the defaults when the
camera is turned off.
Saving the Menu Items (Memory)
Item Description
Default
Setting
Flash The flash mode setting on the b button is saved.
O
Drive Mode
The drive mode setting (gj, etc.) selected using the
four-way controller (2) is saved.
P
Focus Mode
The focus mode setting on the ) button is
saved.
P
Zoom Position
The optical zoom position setting on the zoom button
is saved.
P
MF Position The manual focus position is saved.
P
White Balance
The [White Balance] setting on the [A Rec.Mode]
menu is saved.
P
Focusing Area
The shifting position of [Focusing Area] setting on the
[A Rec.Mode] menu is saved.
P
AE Metering
The [AE Metering] setting on the [A Rec.Mode]
menu is saved.
P
Sensitivity
The [Sensitivity] setting on the [A Rec.Mode] menu
is saved.
P
EV Compensation
The [EV Compensation] setting on the
[A Rec.Mode] menu is saved.
P
Digital Zoom
The [Digital Zoom] setting on the [A Rec.Mode]
menu is saved.
O
DISPLAY The LCD monitor display mode is saved.
P
File #
The file number is saved. If a new SD Memory Card
is inserted, file numbers are assigned sequentially.
O
e_kb386.book Page 95 Monday, February 28, 2005 2:39 PM