14
1
Getting Started
Powering the Camera
Install the battery provided with the camera.
1 Open the battery/card cover.
Slide the battery/card cover in the direction indicated by the arrow and flip
the cover open .
2
Insert the battery with the
2
symbol facing toward the LCD
monitor while using the side of the battery to press the battery
lock lever in the direction indicated by the arrow.
3 Close the battery/card cover.
1 Release the battery by using your finger to press the battery
lock lever in the same direction as when you inserted the
battery.
Pull the battery out.
Installing the Battery
Removing the Battery
If you intend to use the camera continuously for a long period, use of the
AC adapter D-AC8 (optional) is recommended. (1p.21)
• Insert the battery correctly. If the battery is incorrectly oriented, it may
cause a malfunction.
• Do not remove the battery when the camera is turned on.
• If you do not intend to use the camera for a long time, remove the battery.
• If the camera is left without the battery for a long time, the date will be
reset.
Battery lock
lever
Battery/card cover
Battery
3
2
1
1
2
1
2
e_kb386.book Page 14 Monday, February 28, 2005 2:39 PM
To Next Page
Loading...
