64
Taking Pictures
4
You can switch the Drive mode to Remote Control mode and take
pictures using the remote control unit E or F (optional).
1 Press the four-way controller (2) in
Capture mode to display
i or h on
the LCD monitor.
The self-timer lamp blinks slowly and the
camera is ready to take the picture.
2 Press the shutter release button on the
remote control unit.
i The self-timer lamp blinks quickly and the picture is taken after
approximately three seconds.
h The picture is taken immediately.
Using the Remote Control Unit (optional)
Taking Pictures Using the Remote Control
Focusing may be compromised if you move the camera while the
self-timer lamp is blinking.
1
112
12:00
112
12:00
3/24/2005
3/24/2005
e_kb386.book Page 64 Monday, February 28, 2005 2:39 PM
To Next Page
Loading...
