57
Taking Pictures
4
You can take a number of images and join them together to form a
panorama picture. The software supplied with the camera (ACDSee for
PENTAX) and a computer are necessary for joining the images. The
Panorama Assist mode enables you to overlap the edges of the images
so that they are easier to join together later into a panorama picture.
1 Press the MODE button in Capture mode.
The Mode Palette appears.
2 Use the four-way controller
(2345) to select
F (Panorama
Assist mode).
3 Press the OK button.
4 Use the four-way controller to choose
the direction in which the images will
be joined.
4 Joins the images at the left.
5 Joins the images at the right.
2 Joins the images at the top.
3 Joins the images at the bottom.
The example shows the images when
5 is selected.
Taking Panorama Pictures
(Panorama Assist Mode)
5, 6
3, 7
2, 4
1
OK
OKPanorama Assist
Set shift direction
Set shift direction
e_kb386.book Page 57 Monday, February 28, 2005 2:39 PM
To Next Page
Loading...
