15
Getting Started
1
Use the battery charging stand D-BC25 supplied with the camera to charge the
battery before using the camera for the first time or when the [Battery depleted]
message appears. You can charge the battery without removing it from the
camera.
1 Connect the AC plug cord to the battery charging stand
D-BC25.
2 Plug the AC plug cord into the power outlet.
3 Turn the camera off.
4 Place the camera in the battery charging stand.
Position the camera so that the lens rests in the depression in the case. The
CAMERA charging indicator on the stand lights red while the battery is being
charged and goes out when charging is completed.
5 Remove the camera from the battery charging stand when
charging is completed.
Charging the Battery
Charging the Battery in the Camera
To power outlet
Battery charging stand D-BC25
AC plug cord
1
2
CAMERA charging indicator
4
e_kb386.book Page 15 Monday, February 28, 2005 2:39 PM
To Next Page
Loading...
