28
Getting Started
1
If you select [12h] in Step 3, the setting switches between am and pm
corresponding to the time.
6 Press the OK button.
The camera is ready to take pictures.
• When you finish the settings and press the OK button, the camera clock
is reset to 00 seconds.
• To set the exact time, press the OK button when the time signal (on the
TV, radio, etc.) reaches 00 seconds.
When the Initial Settings screen is displayed, you can cancel the setting
operation and switch to Capture mode by pressing the MENU button. In
this case, the screen will appear next time you turn the camera on.
e_kb386.book Page 28 Monday, February 28, 2005 2:39 PM
To Next Page
Loading...
