73
Taking Pictures
4
In Focusing Area mode, you can change the focusing point by moving
the focus frame.
1 In (Focusing Area) mode, press the four-way controller
(2345).
Moves the focus frame [ ] (Focusing area).
2 Press the shutter release button halfway.
The focus frame is fixed in its new position. Press the OK button again
to change the setting of the focusing area.
Changing the Focusing Point
Troubleshooting “Subject is not in focus” 1p.157
e_kb386.book Page 73 Monday, February 28, 2005 2:39 PM
To Next Page
