80
Taking Pictures
4
5 Press the shutter release button halfway.
The camera is ready to take the picture.
Place a white material such as a piece of white paper in front of your
camera to adjust white balance.
1 Select [K] (Manual) on the White
Balance screen.
2 Point the camera at the white material
so that it fills the screen.
3 Press the shutter release button fully.
The white balance is automatically
adjusted. [Complete] appears on the LCD monitor.
4 Press the OK button.
The setting now adjusted is saved and the screen returns to the [A
Rec.Mode] menu.
5 Press the shutter release button halfway.
The camera is ready to take the picture.
Saving the White Balance 1p.95
Manual Setting
White Balance
OK
AWB
MENU
Manual
Manual
OK
OK
Adjust
SHUTTER
Adjust
e_kb386.book Page 80 Monday, February 28, 2005 2:39 PM
To Next Page
