Pentax Optio W10 - Page 100

98
4
Taking Pictures
7 Press the 4 button.
The AF Setting is saved.
8 Press the 3 button twice.
The camera returns to capture status with the current setting.
You can limit the lens movement range according to the conditions.
Set the [Focus Limiter] to O (On) to limit the focus to far distances from
normal range during normal shooting and to close distances during
macro shooting. This enables faster focusing.
1 Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2 Use the four-way controller (23) to select [AF Setting].
3 Press the four-way controller (5).
The AF Setting screen appears.
4 Use the four-way controller (23) to select [Focus
Limiter].
5 Use the four-way controller (45)
to select O (On) or P (Off).
The Focus Limiter setting is saved.
6 Press the 3 button twice.
The camera returns to capture status with
the current setting.
•In Y, C and N mode, [Focusing Area] can only be set to J
(Multiple) or K (Spot).
•In I, > and z mode, [Focusing Area] is set to J (Multiple).
• If you use the [Focusing Area] function frequently, you can save
time by assigning it to the Green button. (p.58)
Setting the Focus Limiter
AF Setting
MENU
Focusing Area
Focus Limiter