67
4
Taking Pictures
Y
In this mode you can take pictures using the frames stored in the camera.
1 Press the four-way controller (3) in A mode.
The Capture Mode Palette appears.
2 Use the four-way controller
(2345) to select Y (Frame
Composite).
3 Press the 4 button.
A 9-frame display of the frame selection
screen appears.
4 Use the four-way controller
(2345) to choose the frame you want to use.
5 Press the 4 button.
The selected frame appears in single-image
display. You can choose another frame
using either of the following operations.
• Use the four-way controller (45) to
choose a different frame.
•Press the 3 button or f on the
Zoom/f/y button to return to the 9-
frame display of the frame selection
screen, and then perform Step 4 to choose a different frame.
6 Press the 4 button.
The frame appears on the screen.
7 Press the shutter release button halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
8 Press the shutter release button fully.
The picture is taken.
Framing Your Pictures (Frame Composite)
7, 8
1, 2, 4
3, 5, 6
OK
To Next Page
Loading...
Need help?
General
