77
4
Taking Pictures
R q < B i \ E x Q P D N J R
In this mode, pictures are taken continuously for as long as the shutter
release button is pressed.
1 Press the four-way controller (2) in A mode.
2
Use the four-way controller (
453
)
to select
1
(Continuous Shooting)
or
c
(HS Cont. Shooting) and press
the
4
button.
The camera is ready to take a series of pictures.
3 Press the shutter release button
halfway.
The focus frame on the LCD monitor turns green if the subject is in focus.
4 Press the shutter release button fully.
Pictures are taken continuously for as long as you keep the shutter
release button pressed.
Taking a Series of Pictures (Continuous Shooting
Mode/High Speed Continuous Shooting Mode)
1
Continuous
Shooting
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality,
the longer the interval between shots.
c
HS Cont.
Shooting
Pictures are taken continuously at a speed of 3 frames per
second until the buffer memory is full.
• The flash will not discharge in Continuous Shooting and High
Speed Continuous Shooting mode.
• The continuous shooting function is not available in A, C, O, Y,
I, Q, C, X, >, y, z or A mode.
• You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of continuous shooting will vary according to the
Recorded Pixels and Quality Level settings.
• The number of recorded pixels is fixed at h in high speed
continuous shooting mode. When Capture mode is set to R, the
number of recorded pixels is set to V (1280×960).
•
The focus, exposure and white balance are locked with the first image.
3, 4
1, 2
2
Drive Mode
To Next Page
Loading...
Need help?
General
