139
6
Editing and Printing Images
This function lets you add a decorative frame to still pictures. There are
three frames already stored in the camera.
1
Enter the
Q
mode and use the four-way controller (
45
)
to choose the image to which you want to add a frame.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller (2345) to select Y
(Frame Composite).
4 Press the 4 button.
A 9-frame display of the frame selection
screen appears.
5 Use the four-way controller
(2345) to choose a frame.
6 Press the 4 button or y on the
Zoom/f/y button.
The selected frame appears in single-image
display.
You can choose another frame using either
of the following operations.
• Use the four-way controller (45) to
choose a different frame.
•Press the 3 button or f on the Zoom/f/y button to return to
the 9-frame display of the frame selection screen, and then perform
Step 5 to choose a different frame.
Adding a Frame (Frame Composite)
OK
Guide
To Next Page
Loading...
Need help?
General
