138
6
Editing and Printing Images
You can correct images where the flash has caused the subject to
appear with red eyes.
1 Enter the Q mode and use the four-way controller
(45) to choose the image you want to correct.
2 Press the four-way controller (3).
The Playback Mode Palette appears.
3 Use the four-way controller (2345) to select Z (Red-
eye Compensation).
4 Press the 4 button.
A confirmation dialog for overwriting the
image appears.
5 Use the four-way controller (23)
to select [Overwrite] or [Save as].
[Save as] is the only available option for
protected images.
6 Press the 4 button.
The edited image is saved with the same number of recorded pixels
and quality level as the original.
Red-eye Compensation
• The red-eye compensation function cannot be used on movies or
on images where red eyes cannot be detected on the camera. An
error message appears in Step 4.
• The red-eye compensation function can only be used with still
pictures taken with this camera.
OK
Guide
To Next Page
Loading...
Need help?
General
