162
8
Settings
7 Use the four-way controller (23) to select [1], [2], [3],
[Off] or [USER] and press the 4 button.
The selected sound type is saved.
8 Set [Shutter Sound], [Operation Sound] and [Self-timer
Sound] in the same way as in Steps 5 to 7.
Select [On], [Off] or [USER] for the self-timer sound.
9 Press the 3 button.
The setting is changed and the screen returns to the [u Setting] menu.
You can set the first two seconds of your favorite recorded sound as the
user sound and then use this as the start-up sound or shutter sound. The
sound to be used is recorded with the camera. (p.153)
1 Select [USER] in Steps 7 and 8 above.
2 Press the 4 button.
The Playback screen appears if a sound
that can be used as the user sound has
been saved in the camera. USER appears
for the sound set as the user sound.
3 Use the four-way controller (45)
to choose a sound file.
Four-way controller (2) Plays back the first two seconds of the
sound file
Four-way controller (3) Stops playback
4 Press the 4 button.
The selected sound is set as the user sound for the start-up sound or
shutter sound.
Setting the User Sound
MENU
Cancel
To Next Page
Loading...
Need help?
General
