6
8
9
/#
Press the four-way controller
(T).
The frame moves to [Date].
Date Format mm/dd/yy 24h
Time 00:00
Settings complete
_Caneel
Press the four-way controller ( b ).
The frame moves to the month.
Use the four-way controller
(A T) to change the month.
Change the day and year in the same
manner.
Next, change the time.
If you selected [12h] in step 4, the
setting switches between am and pm
corresponding to the time.
Date Format mrn/dd/yy 24h
Time 00:00
Settings complete
_ENUjCancel
Press the four-way controller
(T) to select [Settings
complete].
Date Format mm/dd/yy 24h
Date 01/01/2011
Time O0:O0
_Caneel _OK
Press the OK button.
This confirms the date and time.
!f you press the OK button in step 10, the camera clock is reset to O0
seconds. To set the exact time, press the OK button when the time
signal (on the TV, radio, etc.) reaches O0 seconds,
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the MENU button i In this case, the [Initial Setting] screen wi!!
appear next time you turn the camera on.
To Next Page
Loading...
Need help?
General
