If you have registered two or three pets, choose the pet you want to
detect.
1
Press the [_@]button on the
capture status screen in
,o_(Pet) mode.
The pet registration screen appears.
Selecting pet to shoot
iiiilililililililililililililil1
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
iiiilililililililililililililil2
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
3
4
Hilililililililililililililil5
iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii
...............................................................%_®"J
,2 Use the four-way controller (• _) to select the pet you
want to detect,
3 Press the OK button,
The selected pet is switched to the pet you want to detect and the
camera returns to capture status.
Press the [_@]button on the Selecting pet toshoot
capture status screen in
% (Pet) mode.
The pet registration screen appears.
_Cancel
Use the four-way controller ( • l, ) to select the pet you
want to delete.
Press the Green button.
Use the four-way controller (•) to select [Delete].
Press the OK button.
_Delete
_OK
The selected pet is deleted.
' [Focusing Area] is set to _) (Automatic Tracking AF) and the flash
mode is setto @ (Flash Off). Howeve r, you can change these settings.
• [Focus Assist]is set to off. However, you can change this setting.
_Delete
_Cancel _OK
To Next Page
Loading...
Need help?
General
