Pentax SF10 - Page 45

2
2. When the shutter release button is pressed lightly,
the [M] indication and a shutter speed appear in
the viewfinder. When the shutter speed is 1/15 1
sec., ''LT” glows or flickers.
For example, if a blinking shutter speed indication
appears, the exposure is incorrect. Shift the shutter
speed or turn the aperture ring until the blinking
indication goes off and a solid shutter speed
indication appears.
Note: Out-of-meter-coupling-range warning
If the subject is too bright or too dark, the viewfinder
indication blinks to warn of extraordinary lighting
conditions.
If the blinking goes off after turning the aperture ring
either to a smaller aperture (toward a larger f-number
such as f/22) or to a larger one (toward a smaller
f-number such as f/1.4), you are ready to shoot.
• If a correct exposure cannot be obtained by turning the
aperture ring, select another shutter speed.
• If a correct exposure cannot be obtained by shifting the
shutter speed, select another aperture.
41*