Pentax SF10 - Page 59

Out-of-meter-coupling^range warning
• The warning is indicated by a blinking light.
• "Out-of-nnetering-range" means the subject is
beyond the measurable limits of the camera's exposure
meter because of extremely bright or dark lighting
conditions.
• "Out-of-coupling-range" means a combination of
shutter speed and aperture is not available even if
the lighting condition is within the metering range.
• The mark in the chart at left indicates blinking.
How to photograph an out-of-metering-range subject:
1. If the subject is too bright, use an ND (neutral
density) filter (available at camera shops).
2. If the subject is too dark, use a flash or other lighting
equipment.
55*