Pentax SF10 - Page 67

External LCD
Information:
Mirror:
Built-in Flash:
Flash Synchron¬
ization:
Film Advance/
Rewind:
Film Speed
Setting:
Self-timer:
Power Source:
Dimensions:
Weight:
Focus mode, exposure mode, shutter speed, RTF recommendation (low-light warning), recharge
completion, successful discharge, illumination-angle warning, exposure counter, film winder mode,
film loading/winding/rewinding, film loading error, self-timer, low battery warning and aperture-ring/
select dial instructions.
Swing-up-type instant-return mirror with AF secondary mirror.
RTF (Retractable TTL Auto Flash) with AF spotbeam projector. Guide number: 12 (at ISO 100/m).
Illumination angle: coverage for angle of view of lenses with focal length of 35mm or longer. Recycling
time: approx. 4 sec. with fresh lithium battery.
With built-in RTF or via accessory hotshoe. Sync speed: 1/100 sec, set automatically with RTF or
dedicated auto flash upon full charge. Automatic flash-exposure adjustment by built-in RTF,
AF400FT2 and AF240FT according to lighting conditions (1/60 sec. to 1/100 sec. and f/2.8 to f/11
at ISO 100 with automatic determination of discharge). TTL Auto Flash mode possible with Pentax
dedicated flash units (AF400FTZ, AF240FT, AF400T, AF280T, AF200T and AF080C).
Automatic winding/rewinding and automatic rewind stop by built-in film winder. Advance modes: (1)
single frame and (2) consecutive (at approx. 2 frames/sec,).
Automatic with DX-coded film from ISO 25 to 5000, (Fixed setting at ISO 100 with non-DX-coded
film.)
Electronically controlled type with delay time of approx. 12 sec. Operation confirmation by LED
indicator, PCV beep tone and LCD panel.
OneGV lithium battery (2CR5).
152.5mm(W) x 96mm(H) x 63.5mm(D) (6.0'^ x 3.7'^ x 2,5^')
630 g (22.2 oz.).
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT ANY OBLIGATION
ON THE PART OF THE MANUFACTURER.