Absolute rotary encoder P**58
General
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Date of issue 01/15/04
5
1.3 PROFIBUS technology
PROFIBUS is a manufacturer independent, open fieldbus standard specified by
international standards EN 50170 and EN 50254. There are 3 versions: DP, FMS and
PA. The rotary encoders support the DP versions and are designed for commonly
used transfer rate up to 12 MBaud.
In addition to manufacturer specific functions, the devices support Classes 1 and 2
according to the encoder profile. This device profile can be ordered from the
PROFIBUS user organisation with order number 3.062. Additional information on
PROFIBUS (functionality, manufacturer and products) as well as standards and
profiles are also available here:
PROFIBUS User Organisation
Haid-und-Neu-Strasse 7
76131 Karlsruhe
Tel.: +49 721 9658-590
Fax: +49 721 9658-589
E-mail: www.profibus.com
1.4 Symbols used
This symbol warns of a danger. Failure to heed this warning can lead
to personal injury or death and/or damage to or destruction of
equipment.
This symbol warns of a possible fault. Failure to observe the
instructions given in this warning may result in the device and any
facilities or systems connected to it developing a fault or even failing
completely.
This symbol draws your attention to important information.
Warning
Attention
Note
To Next Page
Loading...
Need help?
General
