PerkinElmer LAMBDA 265 Installation Instructions

09931228D
21
NOTE: Calculation Start Temperature and Calculation End Temperature must be entered within Start
Temperature and End temperature.
4. Select Wavelength Range and enter the wavelength range for the measurement.
5. After setting parameters for Experiment Setup, Baseline Correction and Temperature
Based Kinetics, selectOK.
6. Select Single Cell Peltier in the Accessory Type on the main screen of the software.
7. Click on the setup button (pencil icon) in the Experiment Setup on the main screen of the
software.

PerkinElmer LAMBDA 265 Specifications

General

Brand	PerkinElmer
Model	LAMBDA 265
Category	Measuring Instruments
Language	English